|
| Your Location: > Home > Products |
 Products |
 |
|
 |
JIK-CY300
JIKET Electronic Control Box JIK-CY300 Series |
| |
Main Features Of Computer-Controlled System:
•JIK730/740/750/760/780 series direct-drive computer overlock machine with interoperable control system;
•JIK1558/N1668N series direct-drive coputer covering stitch machine with interoperable cotrol system;
•JIK9188MX-D3/8188M-D3/998M-D3 series direct-drive computer plain stitch machine with interoperable control system,embedded display and plug-type display;
•JIK7188M-D3/7188M-D2series direct-drive computer plain stitch machine with Interoperable control system;simple shear-thread and two-automatic functions can be used after resetting;
•Simple shear-thread/two-automatic functions(without display)can be used for automatic cutting thread,automatic pulling thread,etc;
•JIK730M-17DKS/740M-13DKS series overlock machine with interoperable peneumatic device;
•Control system with multi-point positioning mode will make position-ing more accurately;
•Software and hardware bi-directional protection;flow over control for solenoid valves;
•Switching power supply system to ensure that reversed and supply power immediately,automatic prolection as well;
•In case of any control system failure,please turn to professional and technical personnel,so as to avoid greater losses. |
|
 |
Control System Of Lockstitch Sewing Machine
| Function |
JIK-CY300
Direct-drive a variety of functions |
QG682-PS
Direct-drive a variety of functions |
| Motor Type |
Ac Servo Motor |
Ac Direct Drive Motor |
| Voltage Range |
170-255V/50Hz |
170-255V/50Hz |
| Output Power |
550W |
500W |
| Pulley Size |
75 |
65 |
| Needle Up/down |
ο |
ο |
| Slow Start(r/min) |
100-2000 |
200-1500 |
|
The maximum speed limit(r/min) |
3700 |
200-7500 |
|
Maximum speed(r/min) |
50-4500 |
200-4000 |
|
Automatic needle sewing speed(r/min) |
100-800 |
200-400 |
| Thread Trimming/wiping |
ο |
ο |
| Automatic Reverse Stitching |
ο |
ο |
| Protection Device |
ο |
ο |
| Free Sewing/fixing Sewing |
ο |
ο |
| Mode Sewing |
Four/Seven/Ten Sections |
Four/Seven/Ten Sections |
| Stitch/backstitch |
ο |
ο |
| Accelerated Curve Adjustment |
ο |
ο |
| Adhystable Parameters |
ο |
ο |
| Automatic Test |
ο |
ο |
| Note:"ο" Is Standard Configuration.Presser Foot Lifter Is Optional. |
Control System And Fault Code Of Overlock Sewing Machine And Interlock Sewing Machine
| Function |
JIK-8
Direct Drive Mult-functions |
JIK-9
Direct Drive Mult-functions |
| Motor Type |
Direct Drive Motor |
Direct Drive Motor |
| Voltage Range |
165-250V |
165-250V |
| Output Power |
350W |
400W |
| Current |
4.5A |
4.5A |
| Frequency |
50Hz |
50Hz |
| Cartons |
2 |
2 |
| Poles |
8 |
8 |
| Revolutions |
0-600r/min |
0-3500r/min |
| Torques |
0.20mm |
0.20mm |
| Needle Position |
Upper Position |
Upper Position |
| E-01 Hardware Short-Circuit Protection |
Damaged Controller Driver,Motor Coil Short Circutit,Instantaneous Over Current
|
E-02
Software Over-Crrent Protection |
Over Load |
E-03
Overload Protection |
Beyond The Motor Power |
E-05
Inut Voltage Protection |
Power Supply Voltage Beyond The Scope |
E-06
Stall Protection |
Locked-rotor Or Motor Phase Missing
|
E-07
No-load Protection |
Rising Sensor Failure,Magnet/Sensor/Wiring/Motor Missed |
E-013
Encoder Fault |
Poor Contact Or Damage To The Motor Encoder |
E-15
Pedal Fault |
Pedal Plug Connection Is Bad Or Circuit Problems |
BACK  |
|
